26 For orders please call 888 874 3336 (Branch Locations) 800 366 4472 (Technical Sales) www.tri-ed.com Specifications are subject to change without notice. Products may not appear as shown.Trademarks are the property of their respective owners.We are not responsible for any errors or omissions in specifications and do not warrant the same. © 2017/18 Video Surveillance Internet Alarm Communicator DSC-TL250 • Compatible with PowerSeries (v3.24 and higher) and MAXSYS (v3.31 andhigher) control panels • Works over local LAN/WAN networkor the Internet • 128-bit AES encryption (NIST approved) • Compatible with Sur-Gard SystemI-IP/II/III/IV/5 monitoring station receivers TRANSMISSION Internet Alarm Communicator DSC-LE2080(R)E • Compatible with HS2016/ HS2032/HS2064/HS2128 • Back-up and primary LTE (cellular) alarm communication • Visual Verification over LTE (requires System 5) • LE2080RE version available for Serial Integration TRANSMISSION Internet Alarm Communicator DSC-tl260R • Compatible with PC1864/PC1832/ PC1616control panels (v4.1 and higher) • SIA protocol • Contact ID Protocol (with PowerSeriesv4.5 and communicator firmware v1.1 or higher) • Compatible with leading-edge interactivesolutions supported by DSC TRANSMISSION TRANSMISSION HSPA Cellular Alarm Communicator DSC-3g2080(R)E • Compatible with HS2016/ HS2032/ HS2064/ HS2128 control panels • Back up and primary Cellular alarm communication • Visual verification over Cellular (requires System 5) • 3G2080RE version available for serial integration TRANSMISSION Internet Security Alarm Communicator DSC-tl280(R)e • Compatible with HS2016/ HS2032/ HS2064/ HS2128 control panels • Back up and primary Internet alarm communication • Visual verification over Internet (requires System 5) • TL280RE version available for serial integration • Supports 3rd party integration via IP and serial Internet and HSPA Dual-path Alarm Communicator DSC-TL2803GRE • Compatible with HS2016/ HS2032/ HS2064/ HS2128 control panels • Fully redundant Internet and Cellular dual-path alarm communication • Visual verification over Cellular or Internet (requires System 5) • TL2803GE version available for serial integration • Supports 3rd party integration via IP and serial TRANSMISSION PowerSeries Neo HSPA / CDMA Cellular Alarm Communicator DSC-3G8080I DSC-CD8080I • 4 integrated communicator models: 3G8080; 3G8080I*; CD8080**; CD8080I*/** • 2 integrated cellular technologies: HSPA (3G); CDMA** • Compatible with HS2016/ HS2032/ HS2064/ HS2128 control panels • Compatible with Sur-Gard System I-IP/II/III/IV/5 monitoring station receivers TRANSMISSION IMPASSA HSPA / CDMA Cellular Alarm Communicator DSC-3G8055I DSC-CD8055I • 4 integrated communicator models: 3G8055; 3G8055I*; CD8055**; CD8055I*/** • 2 integrated cellular technologies: HSPA (3G); CDMA (only available in US) • Built-in EmPower/ Z-Wave automation • Compatible with IMPASSA SCW9057 control panels (requires panel version 1.3+) TRANSMISSION TRANSMISSION Universal Internet Alarm Communicator DSC-TL3000 • Compatible with most control panels that use the Contact ID format • 4 on-board programmable zone inputs and 2 programmable voltage outputs as stand- alone module • Compatible with Sur-Gard System I-IP/II/III/IV/5 monitoring station receivers HSPA Universal Cellular Commercial Fire Alarm Communicator (USA Only) DSC-3G4010CF • Compatible with control panels that communicate using Contact ID or SIA (300 baud) formats • 4 on-board inputs with NC, NO or SEOL supervision • Can be used as sole or multiple path communicator • Full event reporting TRANSMISSION fire detection intrusion detection